Here’s a concise summary of the PingSunday article “How To Remove Used Rubber in Table Tennis”—which explains replacing an old rubber with a new one:
How to Replace Your Table Tennis Rubber
1. Peel off the old rubber
Carefully lift the rubber from one corner.
Slowly peel it off, keeping the angle shallow to avoid damaging the blade
2. Clean off old glue from the blade
Scrape or rub away the remaining glue residue.
Ensure the blade surface is smooth and clean before applying new glue
3. Apply glue evenly
Apply a thin, even coat of water-based table tennis glue to the blade and to the back of the new rubber.
Let each coat dry until tacky—repeat for 1–2 thin layers (or more depending on instructions)
4. Attach and align the new rubber
Starting from one end (typically the blade’s bottom), align and press the rubber onto the blade.
Roll or press firmly to avoid air bubbles and ensure full contact
5. Trim excess and press down
Use a sharp blade to trim extra rubber along the handle.
Place the assembled racket under weight (like books) for some time to secure adhesion
Additional Tips from Community & Experts
Removing glue from sponge: If reusing a rubber, scrape off old glue gently to not damage the sponge
Alignment aid: Some players use parchment or protective paper for accurate placement and bubble-free application Don’t skimp on weight pressing: Letting the racket sit under a flat weight overnight improves even bonding
Quick Replacement Checklist
Peel off old rubber
Clean blade surface thoroughly
Apply 1–2 coats of glue (letting each dry)
Align and press new rubber carefully
Trim edges and press under weight
Would you like image steps, a diagram, or a deeper dive into glues (water-based vs organic)? Just let me know!
